Horizontal Rotary Surface Grinder HR-800AND

  • Horizontal Rotary Surface Grinder HR-800AND
    • Meehanite Class FC30 casting with slide way provides high stiffness and wear resistance maintaining the accuracy of the machine.
    • Spindle lateral design creates stability during heavy cutting.
    • Vertical feeding uses 2 high stiffness and rigidity linear roller guides,
    • 45CA(Blocksx6)/HR-800AND,65CA(Blocksx6)/HR-1000/1200AND allowing smoothly vertical feeding whilst maintaining high stiffness.
    • Small workpiece suction is accomplished by fine electrical magnetic chuck.
    Rotary magnetic chuck dia. mm 800
    Maxi grinding radius mm 400
    Distance of table surface to spindle surface center mm 580
    Rotary magnetic chuck speed r.p.m. 10~60
    Rotary magnetic chuck horse power kw 4.5
    Spindle motor HP 15
    Spindle speed (50/60Hz) r.p.m. 1450/1750
    Auto downfeed horse power kw Servo Motor 1kw
    Vertical hand wheel downfeed per revolution MPG/mm x1, x5, x10 /
    0.1, 0.5, 1
    Vertical hand wheel downfeed per graduation MPG/mm x1, x5, x10 /
    0.001, 0.005, 0.01
    Wheel size (dia x width x bore) mm 405x50x127
    Net weight / gross weight (approx) kg 7000/8000
    Packing size (LxWxH) mm 4000x2300x2450
  • Coolant system Magnetic filter Auto. paper strip filter with magnetic separator and coolant system Oil mist collector
    Demagnetize On line wheel balance system (Manual) SBS (Auto) Digital readout
    Inverter Air-Conditioner    
    Si Quariz Ceramics Ceramics Ring
    Retaining Ring Slitting Saws Slitter Knife Spindle parts